
Precision roller feeder device, zinc-based alloy stamping, roller feeder
The precision roller feeder is mainly composed of an eccentric disk, a drawbar, a rocker arm, a fuselage, a lower roller, an upper roller, a guiding device, a unidirectional device and a reverse device.
The lower roller is cylindrical, horizontally mounted on the fuselage by the axle and the needle bearing and the single bearing and can be unidirectionally rotated around the axle. The left end of the axle has a lower roller shaft end gear that meshes with the upper roller shaft end gear and The sprocket for the drive sub-feeder, the upper roller is also cylindrical.
The diameter is equal to that of the lower roller, and is horizontally installed in the slot of the fuselage above the lower roller through the axle, the bearing and the sliding sleeve, and can be moved up and down in the slot of the fuselage by sliding of the sliding sleeve, and the left end of the axle is provided with The upper roller shaft end gear of the lower roller shaft gear meshes with each other and can be synchronously rotated by the shaft end gear transmission around the wheel shaft and the lower roller.
Above the sliding sleeve, there is a pressing spring which can press the sliding sleeve together with the upper roller to press the downward roller and an adjusting screw thereof, and the sliding sleeve is further provided with an eccentric sleeve, a supporting block and a loosening bracket, and is used for the sliding sleeve together with the upper roller. Lift the lower roller's relaxation mechanism.
The roller feeder unidirectional device is fixed to the right end of the lower roller shaft by a flat key and can be rotated synchronously by the axle, and the adjustment sleeve of the coarse adjustment stepping number (or step feeding length) is arranged on the left side.
In actual use, when the punching machine is punched once, the eccentric disk of the output shaft end of the punching machine swings the pulling rod by an angle through the eccentric disk spindle and the cross joint. When the pulling rod swings to the air conditioning of the adjusting sleeve, the roller feeder pull rod The top collapse lock is quickly moved by the spring to the root of the one-way device and drives the one-way device to rotate at a certain angle.
In turn, the upper and lower rollers are synchronously rotated to a certain angle, and the material sandwiched between the upper and lower rollers is stepped 2.2 mm toward the punching machine to realize high-precision high-speed feeding.
Products:
Specification:
Model | MAC2-400 | MAC2-500 | MAC2-600 | MAC2-800 | ||
Stock Width(mm) | 50-400 | 50-500 | 50-600 | 50-800 | ||
Stock Thickness(mm) | 0.3~3.2 | 0.3-3.2 | 0.3-3.2 | -3.2 | ||
Max.Coil Weight(kg) | 3000 | 3000 | 3000 | 5000 | 5000 | 7000 |
Max.Coil O.D.(mm) | 1200 | 1200 | 1200 | |||
Coil I.D.(mm) | 8 | 8 | 508 | 508 | ||
Feed Length(mm) | ~500* | ~500* | ~500* | ~500* | ||
Max. Line Speed(m/min) | 16-24 | 16-24 | 16-24 | 16-24 | ||
Work Roll Number(pieces) | upper 6 lower 5 | upper 6 lower 5 | upper 6 lower 5 | upper 6 lower 5 | ||
Feed Roll Number(set) | 1 | 1 | 1 | 1 | ||
Main Motor(kw) | AC2.9 | AC2.9 | AC4.4 | AC4.4 | ||
Mandrel Expansion | hydraulic | hydraulic | hydraulic | hydraulic | ||
Reel Motor(kw) | 1.5 | 1.5 | 1.5 | 2.2 | 2.2 | 3.7 |
Power(V) | 3 Phase 220V/380V/50HZ | |||||
Operating Air(Mpa) | 0.49 | 0.49 | 0.49 | 0.49 |
Straigtening performance:
tock Thicknees (mm) | Stock Width (mm) | |||
0.3 | 400 | 500 | 600 | 800 |
0.4 | ||||
0.6 | ||||
0.8 | ||||
1.0 | ||||
1.2 | ||||
1.4 | ||||
1.6 | 470 | 470 | ||
1.8 | 400 | 400 | ||
2.0 | 360 | 360 | ||
2.3 | 300 | 300 | 300 | 300 |
2.5 | 230 | 230 | 230 | 230 |
2.8 | 150 | 150 | 150 | 150 |
3.2 | 110 | 110 | 110 | 110 |
*1:(Pneumatic):Option in case of pneumatic mandrel expansion is
provi
GUANGDONG RUIHUI INTELLIGENT TECHNOLOGY CO., LTD.
RUIHUI founded in 2000, the technology of automation periphery is from Japan. RUIHUI has been learning Japan and Germany technology, and using high standards of principle in the parts selection, for assembly process and spare parts, adhere to the requirements in accordance with the original design standard, and into each manufacturing process. In 20 years has accumulated experience and excellent design ability of Japanese engineers guided ruihui highly responsible for Industry and ruihui strong executive team, created a batch of well-known auto parts manufacturers, allowing them to reach the high level in same industry,and investment less.
Customer case
Manufacturing industry; the United States Lear, Honda factory, Ford factory, GAC Group, Chongqing Changan, Wuhan Shenlong, BMW Brilliance, FAW Volkswagen, Beijing Hyundai.
And other household appliances manufacturers; such as GREE, Haier, Midea, Chigo Air conditioning.
hardware manufacturers; such as the United States Southco, are Zhongtai industrial manufacturers success cooperation case.
RUIHUI QUALITY is not the best in the world, and the price is not the cheapest. But we can provide excellent products to help you defeat your competitors.
Products: Feeder machine, Straightener machine, Uncoiler machine, Decoiler with Straightener, 3 in 1 NC Straightener Feeder, Coil handling system, Transfer system, Robot System, to meet the market needs of customers, improve work efficiency, reduce the burden of enterprise management personnel, maintenance of production safety and the customer staff made a significant contribution.
At present the company to further develop the market, at the end of 2017, the total investment reached 30 million USD, plant area of more than 20 thousand square meters, in order to meet the demand on the market and lay a solid foundation after.
Why choose us?
1st,We have a high level of technical research and development team;
2nd,We can provide the design and planning of the whole plant to realize the turnkey project;
3rd, our philosophy: quality is the social responsibility;
4th,our products have been recognized by the market, in the major automotive OEM, home appliance industry, hardware industry has been applied;
5th,We have a highly effective after-sales service team and get customer approval.